ATVF Main Menu
 Home Community Members Web Communication
 Shoutblock
|
Forums › Branding Iron › Can-Am | Bombardier › Just curious about valve ajustement
 
Just curious about valve ajustementThe Ultimate Ride
| View previous topic :: View next topic |
| Author |
Message |
Ron53
Deputy
Joined: Aug 15, 2003
Posts: 1404
Location: Quebec, Canada
|
 Posted: Thu Feb 26, 2009 4:30 am Post subject: Just curious about valve ajustement |
 |
Just curious to know when you adjust your valves on a 800 cc v2 what measurment you adjust them at. I know the spec's and know about the mean value which I did to adjust them but I still hear a LITTLE tapping at lower speeds so I wonder if I should tighten them or leave them at mean value.
_________________
RON53
Now with a 2006 regular green 800cc outlander Max and with 13000 kil.so far 3 problem fixed on waranty.With vip air fairing + mirrors, a kimpex 2 seater box ,Kimpex hand and thumb warmers,garmen gpsmap cx, Moose front cargo box, and perfex skid plates + reinforced frame, JPL front and back steel bumpers. |
|
| Back to top |
|
 |
homersimpson
Wolverine
Joined: Feb 25, 2005
Posts: 259
|
| Posted: Thu Feb 26, 2009 12:33 pm Post subject: Re: Just curious about valve ajustement |
|
Most valves tighten up over time from valve seat wearing.
|
|
| Back to top |
|
|
FST_FWD
Grizzly Bear
Joined: May 15, 2005
Posts: 2146
Location: Calgary AB
|
| Posted: Thu Feb 26, 2009 5:02 pm Post subject: Re: Just curious about valve ajustement |
|
I just had both heads off to do some port work. I adjusted both on the bench and checked them numberous times. Mine still tick also.
_________________
07 CAN AM LTD 800
Ram Air/K+N/Throttle body work
800R intake/Head porting
Power Commander w/Dyno tune, HMF Quiet Racing Series
and a real Groovy winch thinga majigy
Hotrod/ 66 Chevy II
Bike/ 09 Triumph Tiger 1050
C.A.R.S. Supporter
--------------------------------------------------------------------------------------------
Welders: The only people that think a co-worker catching on fire is funny. |
|
| Back to top |
|
|
400maxxt
Fox
Joined: Apr 17, 2008
Posts: 12
|
| Posted: Thu Feb 26, 2009 5:05 pm Post subject: Re: Just curious about valve ajustement |
|
agree on the tightening up
checked mine because it was time and i also heard slight tapping
i found the exhaust loose but within specs and intake had no gap at all.
if yours are within spec i would leave them alone
scott
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
|
Forum FAQ
Search
Log in to check your private messages
Login
