Eiger rolled, now won't start

lamiellm01 · Fox Joined: Jul 28, 2010 Posts: 3

I rolled my 06 Eiger 4x4 yesterday and now I can't get it started! It wasn't a bad roll just fully over once. Any suggestions? It cranks just fine, kind of acts like no spark!

aussie · Posted: Wed Jul 28, 2010 4:55 am Post subject: Re: Eiger rolled, now won't start

Your kill switch could be cactus.......

lamiellm01 · Fox Joined: Jul 28, 2010 Posts: 3

I'm not sure what that means. It is weird though that you mention that. My power lite turns off every time I crank it. If I turn the switch to off then back to run it comes back on.

aussie · Posted: Wed Jul 28, 2010 5:17 am Post subject: Re: Eiger rolled, now won't start

A lot of bikes have a seperate kill switch, normally on the handle bars.

This kill switch turns off the spark, but not the ignition on many bikes.

The roll may have simply turned this switch on. Or buggered it up as in broken, busted or many other terms. CACTUS!

It could also have dislodged your spark plug lead.

Check for spark at the plug first, and go from there.

lamiellm01 · Fox Joined: Jul 28, 2010 Posts: 3

Ill give that a try! Thanks!