hi all,
went out for a nice outride yesterday in a thick sand, bike ran very well , just one issue. wher and how does one set the carb for rich or lean?? while riding in the thick sand in hirange at 25 to 30 km/h i floored it, i felt as if the bike was getting too little fuel at high revs in hirange 4x4 and was wanting to cut out, backing off the throttle a little and it restored itsself.
how can i test to see if the bike is running too lean or too rich.i have a hunch its too lean.i;ve just removed the needle and see it has no setting to set rich/or lean??
apart from that in lowrange 4x4 gunning it no problems, drove out all the obsticals with no issues. on plain dirt in hi ,running 74 to 77km/h. any ideas what it could be??
regards deon
south africa

well fitted a 130 main jet and riched up the motor a quarter turn out,
what a difference.
no more flat spot and bike runs excellent , in limiter the whole time 77km/h.

very happy with this setup

regards

DDT
SA